GYSFLASH 125.12 CNT FV (5m Cables)
Ref. 028883
The GYSFLASH 125.12 CNT FV is GYS's 120 A connected battery charger and power supply for dealership workshops and show… See more
Financing available on this equipment for US shops. Contact us for the monthly terms.
The GYSFLASH 125.12 CNT FV is GYS's 120 A connected battery charger and power supply for dealership workshops and showrooms. It holds a 12 V lead-acid or lithium (LFP) battery at a perfectly stable voltage during diagnostics and module programming, delivers the charging cycle recommended by the vehicle makers, and is fully customisable through its USB port. Made in France, supplied with 5 m cables.
Low or upright: the 125.12 has a low case, 13 cm (5.1 in) high, that rides on a cart and slides under the car. For a unit that stays mounted on the wall or the lift, the GYSFLASH 123.12 CNT FV is the same 120 A unit in an upright case, with its cables on a front reel.
Four operating modes
- Charge: 12 V lead or lithium batteries from 20 to 1,500 Ah, automatic 8- or 9-step curve about 50% faster than a conventional charger.
- Diagnostics / power supply: up to 120 A continuous at 25 °C (116 A at 40 °C) to keep the vehicle electronics awake during flashing, calibration and long diagnostic sessions.
- Showroom: compensates the current drawn by a demonstration vehicle's accessories and keeps the battery optimally charged for months.
- Tester: checks battery voltage, the starting system (starter and battery) and the alternator.
What's automatic, and what you set
- It starts by itself. With Auto-Detect on, connect the clamps and the mode you selected starts after 3 seconds, no button to press. You can switch Auto-Detect off in the settings.
- It charges by itself. The charge runs start to finish without supervision (8 steps for lead, 9 for lithium): it checks the battery, brings back a deeply discharged one from 2 V, charges it, then holds it full, so it can stay connected.
- It restarts by itself. After a power cut, Auto-Restart starts it again with the same settings.
- You set the rest. Choose the mode (lead or lithium charge, Diag+, Showroom or Tester), then the battery type (normal, AGM or flooded lead, or lithium) and its size in Ah; in Diag+, the voltage to hold and the maximum current. If the battery doesn't match the settings, the unit stops with an error code instead of charging.
- Optional: GYS's free configurator. Most shops use the unit as delivered and never need it. The configurator is a free GYS web page (no account, nothing to install) that makes a small settings file you load from a USB stick, to add extra modes: Change Battery (keeps the car powered while you swap its battery, so the modules keep their memory), start assist or an adjustable power supply. It can't add 16 V: for Teslas with a 16 V battery, see the 101.24 or 51.48. Do you need it? See how it works.
Connected and safe
- Add, delete or modify charging modes and profiles by USB; import the configuration files of your brand; export the charging history to a spreadsheet.
- Smart Module Connector socket for a printer, barcode reader and other modules.
- Flexible Voltage: runs on any supply from 85 to 265 V (100 A on 110 V). Protection against short circuit, polarity reversal and overheating.
Specifications: 2,000 W, 5 m / 25 mm² cables with M6 lugs, 6.3 kg (13.9 lb), 33.4 × 13 × 28 cm, EN 60335-2-29. GYS ref. 028883. Which charger fits your workshop? Call (415) 419-5824.
Compare every GYSFLASH unit, with its output on a 120 V outlet, on our battery support units page.
Performance
| Output Current | 120 A at 240 V · 100 A on 120 V |
| On a 120 V outlet | 100 A continuous (77 A at 104 °F) |
| Batteries | 12 V lead & lithium (LFP), 20–1,500 Ah |
| Controller | USB connected, SMC module socket |
Electrical & Physical
| Power supply | 100–127 V / 220–240 V (Flexible Voltage 85–265 V) |
| Frequency | 50 / 60 Hz |
| Protection Rating | IP40 |
| Weight | 13.9 lb (6.3 kg); 23.8 lb boxed with cables |
| Dimensions | 13.1 × 5.1 × 11 in (33.4 × 13 × 28 cm) |
| Certification | EN 60335-2-29 |
Available Downloads
How to install a firmware updateManufacturer Warranty
Every new GYS machine carries a 2-year factory warranty from the date of sale. Keep your invoice — our US team handles claims and service directly.
2-Year WarrantyTechnical Support
Factory-trained technicians for setup, OEM procedures, troubleshooting and maintenance questions.
Parts & Consumables
Need caps, electrodes, dies or arms for this machine? We stock genuine GYS parts in California.
Browse Related PartsCompatible accessories
Genuine GYS parts and options for the GYSFLASH 125.12 CNT FV (5m Cables).
-
GYSFLASH TROLLEY XL - ND
Ref. 028890The GYSFLASH TROLLEY XL turns a 100 A battery support unit into a mobile station. It ...
Regular price $902.00Regular priceSale price $902.00 -
ANTI-ARC SURGE PROTECTION 12V
Ref. 041318ANTI-ARC SURGE PROTECTION 12V (ref. 41318) — GYS battery-support equipment/accessory....
Regular price $51.50Regular priceSale price $51.50






