GYS Welding & Cutting Equipment

MIG/MAG and pulse welders, plasma cutters, torches and genuine GYS consumables — engineered in France, supported from California. Pick a category below or browse the catalog.

Shop by process

Featured machines

1 4
View all
About the range

GYS welding equipment, engineered in France

GYS has built welding machines at its own factory in Saint-Berthevin, France since 1964 — still family-owned, still manufacturing its own inverters. GYSUSA is the official home of GYS in the United States: the same machines, stocked in California, with technical support and consumables from a US team.

The welding range covers three jobs a body shop or fabrication shop actually needs: joining steel, joining aluminium and brazing, and cutting.

  • Steel & fabrication

    MIG/MAG welders

    NEOPULSE and TRIMIG inverters for steel bodywork, chassis and general shop fabrication. Synergic control sets voltage and wire speed from the material and thickness, so a good weld does not depend on who is holding the torch.

    MIG/MAG machines
  • Aluminium & brazing

    Pulse MIG — AUTOPULSE

    Pulsed synergic welding for aluminium and silicon-bronze MIG brazing. Most OEM collision programs — GM, Ford, Honda among them — require a pulse MIG with brazing capability for modern high-strength and aluminium bodies.

    Pulse MIG machines
  • Cutting

    Plasma cutters

    Easy Cut inverter plasma for clean, fast cutting of steel, stainless and aluminium — panel sections, brackets and repair patches without the heat spread of an angle grinder.

    Plasma cutters

Why pulse matters on a modern vehicle

Today's bodies mix high-strength steel, boron and aluminium, and each reacts differently to heat. Pulsed MIG puts the heat in as controlled peaks rather than a continuous arc, so you get penetration without warping thin or heat-sensitive panels.

It is also what makes silicon-bronze MIG brazing possible — the joining method most manufacturers now specify for coated and high-strength panels, because it bonds at a far lower temperature than steel welding and leaves the corrosion protection intact.

Consumables, spares and support

A welder is only as good as what feeds it. We stock genuine GYS torches, contact tips, liners, drive rollers and wire — the parts that decide whether the machine feeds cleanly on a Monday morning.

Not sure which machine fits the work you take in? Call (415) 419-5824 and talk to someone who works on these every day.

GYS Welding Catalog

Open full screen

Flip through the full official welding catalog — machines, torches and genuine GYS consumables.

GYS welding and cutting equipment in the USA

GYS makes the pulse MIG welders that OEM collision programs specify, and the plasma cutters, torches and consumables that go with them. The MIG/MAG welders here are the US-voltage versions: the three-torch P3 GYS AUTO for single-phase shops, the AUTOPULSE 320-T3 for three-phase, and NEOPULSE units at clearance prices. The EASY CUT plasma cutters run on 110 to 240 V with no high-frequency start.

Consumables that fit

Each machine page lists its torches, liners, contact tips, drive rolls and wire. We stock CuSi3 silicon-bronze wire for MIG brazing, AlSi5 and AlMg5 aluminum wire and ER70S-6 steel wire in the reel sizes GYS feeders take, plus auto-darkening helmets and protection. Everything ships from California with the 2-year GYS warranty; start with the MIG welders guide if you are choosing a machine.

  • Since 1964 Family-owned French manufacturer of welding and repair systems.
  • OEM approved Repair systems approved by leading car manufacturers.
  • US-based support Technical help, parts and consumables from our US team — (415) 419-5824.
  • Fast US shipping Equipment and consumables shipped from California.